The Use Of Aluminum Alloy Cable Connector Box
Aluminum alloy fiber optic cable joint box is a common tool used in fiber optic communications. It has many advantages such as high reliability, good environmental adaptability, and easy operation. Today we will introduce how to use it properly.
1. Preparation before use:
Before using the aluminum alloy fiber optic cable joint box, make sure that the fiber optic cables to be connected are cleaned and tested without problems. Any dust or other impurities on the fiber surface may cause attenuation and signal loss. Therefore, it is necessary to clean them before splicing. In addition, check the fiber optic connector for debris and damage.
2. Open the sealing cover:
Press the button or remove the screw to open the sealing cover, then carefully handle the opened cover, ensuring that it is not damaged during operation.
3. Strip fiber optic cables:
Strip the protective layer of the fiber optic cable with a fiber optic stripper, and do not damage the inner fibers. The stripped fiber should have a smooth surface, and the protective layer should be cut off completely, leaving no residue.
4. Splice fiber optic cables:
Carefully splice the fibers and align them with the fiber optic splicing machine according to the correct welding method and optical angle. Pay special attention to the cleanliness of the work surface, and make sure the splicing is accurate, secure and tightly fused.
5. Place fibers and fixamce:
Place the spliced fiber optic cable in the appropriate groove of the joint box, then fix it with the relevant fixtures. Tighten the screws of the fixture to hold the fiber in place.
6. Close the cover:
After the fibers are fixed, press the button or screw on the sealing cover to close the aluminum alloy fiber optic cable joint box. Before closing, check whether the fiber optic connector and cable are properly positioned without any damage. Make sure that the cover is fully seated to avoid dust and moisture from entering the box.
In summary, aluminum alloy fiber optic cable joint boxes are widely used in the field of fiber optic communications, and correct usage can ensure the service life and seamless transmission of fiber optic signals. With proper operation, experts and amateurs can use the joint box with ease and ensure reliable and fast transmission of fiber optic signals.
