Products

Home / Products / Preformed Guy Grips

Tension Clamp Preformed Dead End Guy Grip 7/4.0

Product Description preformed armour , guy wire fittings

Send Inquiry

Product Introduction

Packaging & Delivery

Package Size

30.00cm * 30.00cm * 20.00cm

Package Gross Weight

2.000kg

Product Description

GUY GRIP Dead ends are intended for use on single wood poles associated with distribution construction. They are made of the same material as to which they are applied.
A guy grip is also known as the guy grip dead end or a preformed guy grip. The recognized and reliable preformed guy grip dead end for the connection is also responsible to grip the conductor, ground the wire, and application for optical fiber.

Features:
1) Corrosion Resistant
2) Right Hand Lay
3) Mechanical Test
4) Dimension Test

The dead end is made of steel which is covered with aluminum. It is also made of galvanized steel. The color code, as well as the crossover marks, are used to identify the proper conductor size and show the application initial point. The identification tag shows the conductor diameter range, catalog number, and the nominal size of the conductor. There is also an open helix for small sizes as well as cable for bigger sizes.

Technical Data:
Preformed Conductor Tension Clamp for ACSR

Industry Standard Type	Standard Model	Applicable Conductor Diameter (mm)		Applicable Conductor Model GB1179-1983	Clamp Length (mm)	Weight (kg)	Matched Fitting
Industry Standard Type	Standard Model	Min	Max	ACSR LGJ/LGJF	Clamp Length (mm)	Weight (kg)	Matched Fitting
NL-35/6	DN1112	7.35	8.26	35/6	625	0.2	TC-07
NL-50/8	DN1112	7.35	8.26	35/6	685	0.2	TC-07
NL-70/10	DN1115	10.40	11.68	70/10	740	0.3	TC-07
NL-50/30	DN1115	10.40	11.68	50/30	740	0.3	TC-07
NL-70/40	DN1117	13.12	14.66	70/40	880	0.6	TC-07
NL-95/15				95/55			TC-07
NL-95/20				120/25			TC-07
NL-120/7				150/8			TC-07
NL-120/20	DN1118	14.67	16.59	120/20	890	0.8	TC-07
NL-95/55				95/55			TC-10
NL-120/25				120/25			TC-07
NL-150/8				150/8			TC-07
NL-150/20	DN1119	16.60	18.77	150/20	1020	1.1	TC-07
NL-120/70				120/70			TC-10
NL-150/25				150/25			TC-07
NL-150/35				150/35			TC-07
NL-185/10				185/10			TC-07
NL-185/25	DN1120	18.78	21.26	185/25	1160	1,7	TC-07
NL-185/30				185/30			TC-07
NL-210/10				210/10			TC-07
NL-185/45				185/45			TC-10
NL-210/25				210/25			TC-10
NL-210/35				210/35			TC-10
NL-210/50				210/50			TC-10
NL-240/30	DN1121	21.27	24.05	240/30	1275	2,3	TC-10
NL-240/40				240/40			TC-10
NL-240/55				240/55			TC-10
NL-300/15				300/15			TC-07
NL-300/20				300/20			TC-12
NL-300/25				300/25			TC-12
NL-300/40				300/40			TC-12
NL-300/50	DN1122	24.06	27.20	300/50	1425	3.0	TC-12
NL-300/70				300/70			TC-12
NL-400/20				400/20			TC-12
NL-400/25				400/25			TC-12
NL-400/35				400/35			TC-12