Vibration Damper And Anti Vibration Whip Manufacturer
Function: Utilize its anti vibration part to produce damping effect on wind induced vibration, consume or reduce the vibration energy generated by laminar wind during the operation of optical cables, and prevent damage to fittings and optical cables. Contact Us Email: 3091308085@qq.com Phone: 15753712596
Product Introduction
Spiral damper (anti vibration whip) for optical cables
Applicable: Overhead optical cables in plains, mountain passes, and coastal areas with frequent winds
Explanation: The installation position of the spiral damper on the tension clamp or suspension clamp is the same.
Installation method:
1. The first one is installed at a distance of>500mm from the end of the inner twisted wire, and the second one is installed at a distance of 120mm from the end of the first one. This installation method can be called serial installation.
2. Two pieces are stacked together and installed at a distance of>500mm from the end of the twisted wire. This installation method can be called parallel installation. The two methods have similar vibration reduction effects.
|
Model |
suitable for cable diameter (mm) |
Total length (mm) |
|
FL-10 |
9-11.7 |
1300 |
|
FL-12 |
11.71-14.3 |
1350 |
|
FL-14 |
14.3-19.3 |
1670 |
|
FL-16 |
19.31-23.5 |
1750 |
Hot Tags: Vibration Damper And Anti Vibration Whip Manufacturer,Spiral Vibration Damper
You Might Also Like
Send Inquiry
