Fixing Clamp
Downlead clamps accessories Downlead clamp incorporates a unique design feature that allows the clamp to cover a broad cable range. Downlead Clamps are used to guide ADSS wire from the top of the structure to the splice box.The downlead clamps support the OPGW (optical ground wires) from the upper part of the tower to the splice box. With proper installation of the downlead clamps, it offers sufficient strength and spacing without destroying the cable.OPGW downlead cushion clamp，lowering support，fixing clamp
Product Introduction
Fixing clamp
Usage | Secure the fiber optic cable |
Material | Stainless Steel，Galvanized steel，Rubber |
color | Silver |
Size | 6-20mm |
Application | ADSS,OPGW and optical cable |
life time | 15~20 years |
Certificate | ISO9001 |
weight | 0.5-0.8kg |
Intallation | Pole/Tower |
Business Type | Manufacturer |
Note:
1. Meaning of letters and numbers in the model A- applicable to ADSS cable; Y-lead down clamp; DZ- hot dip galvanized type; Gd-stainless steel belt type; Number - Applicable cable diameter range.
2. Steel strip type lead down clamp is produced according to the rod diameter 300mm standard. Stainless steel belt is made of high quality 201 double bright surface and high strength material. If users have special requirements, please mark the rod diameter and material.
1. Our company also produces cast aluminum S type, cast aluminum duck bill type and hoop type lead down clip, if the user needs, please contact the company.
Instructions for ordering :1. Provide the corresponding cable diameter or model.
2. There are two kinds of lead down clamping rod and tower. If it is used for rod, it is necessary to provide rod diameter.
3. If used in ordinary small lines, you can also choose hollow steel strip ADSS lead down clip.
Installation method:
1. The pole is connected to the pole with the lead down clamp through the 304 stainless steel belt hoop, and the steel belt hoop is installed on the pole, and then the rubber chuck is installed on the steel belt to complete the installation.
2. The tower is connected with the tower Angle steel through the hot-dip galvanized U-shaped piece: Fasten the hot beam broken U-shaped piece to the tower Angle steel worker, and then install the rubber clamp on the U-shaped piece to complete the installation.
Hot Tags: fixing clamp, China, suppliers, manufacturers, factory, wholesale, in stock
You Might Also Like
Send Inquiry
